- FRP blower FRP ducting
- Remote control gas valves with wall mounted gas spouts .
- Granite/Porcelein basin, fitted with 3-way gooseneck spout, 15 amps power sockets
- Gas, water and drain pipe line
- Controlpanal with illuminated indicators.
|
1.2 L X .75 W X 1.22 H, 0.915 L X .75 W X 1.22 H or 2.44 L X .75 W X 1.22 H |
Frame made of 40mm sq. MS pipe, rigidly welded and provided with level adjusting screws and fully powder coated. The work area will be 20mm thick granite top |
Utilities :
| |
|
 |
Frame: Made of 2.0-mm thick 40mm sq. ms pipe, rigidly welded and provided with level adjusting screws and fully powder coated.
Finish: powder coated. Table Ht 0.915 / 0.75 Provided with 20-mm granite top with rounded edges, fully polished. Or with melamine top fitted with under cupboards made from20 mm thick BWR resistant laminated ply wood, consisting of one drawer and two shutter arrangement with cabinet hinges, Nylon roller slides & locks. |
|
Frame: made of 2.0-mm thick 40mm sq.ms pipe, rigidly welded. All frames are provided with level adj.screws.
Finish: powder coated. Size:0.75 W x 0.915 ht
Provided with 20 mm granite top fully polished with rounded edges,
fitted with under cupboards of made from 18 mm thick BWR resistant laminated ply wood, consisting of one drawer and two shutter arrangement with cabinet hinges & locks and nylon roller drawer slides. Suitable arrangement to provide pipe lines for air, nitrogen, hydrogen for the instruments.
|
 |
 |
1.5 w x 0.915 ht
Two tier reagent racks of 0.225w each with/without glass shutter.
Top of the table is polished black granite/melamine.
Utilities One end of the table is provided with porcelain sinks and the other is provided with a waste disposal flap door and collection bin arrangement. Each sink is provided with 3-way gooseneck waterspout. The Reagent rack is also provided a set of 5 in 1 multi pin power socket at every one meter apart. These will be wired through a concealed PVC tray ducting. The table is fitted with under cupboards on each side-as per requirement. |
|
Size:0.3w x 0.915 ht.
This wall rack will fitted along the wall above the work benches at 300mm height from the table top. Made of 18 mm thick laminated BWR grade plywood with all internals fully epoxy varnish coated. The Shelves are placed at 300 mm apart. The sliding shutters are made of toughened glass.
|
 |
 |
This for storing chemicals which contaminate / pollute the lab.
This is placed in line with the FCs so that the gases/fumes from this storage system can be exhausted by connecting the ducting to nearest Fume Hood`s suction inlet. By this method a negative pressure is induced in this space, to keep it continuously flushed.
The inner walls are laminated with Polypropylene lining and provided with PP shelf and drawers and the interior is illuminated by a shatter proof lighting |